A Daikin gas furnace system creates warmth by efficiently burning natural gas or propane gas. The
heat then moves through a heat exchanger and warms the air blown over by the home's air ducts.
The furnace's blower pushes the warmed air through the ductwork, keeping your entire home cozy
and comfortable.
To complement the cooling features of an air conditioning
system, the indoor unit provides the heating function and helps circulate conditioned air throughout
your home.
When the thermostat or control system calls for heat, valves are
opened to deliver gas. Modulating models include self-adjusting BTU or heat valves and a high-efficiency
blower motor.
Whole Home Gas Furnace
Durable silicon nitride igniter
Gas flows over the igniter to establish a flame. This flame is
drawn through the burners to heat the heat exchanger. Eliminates the need for an always-on, energy-wasting
pilot light or pilot flame.
Whole Home Gas Furnace
Tubular stainless steel heat exchangers
The heat produced from burning natural gas or LP heats the
primary and secondary heat exchangers, which are utilized for outstanding durability and heat transfer.
Whole Home Gas Furnace
Variable-speed blower motor
Gently ramps up or down to blow air from the home's return vents
over the hot heat exchanger according to furnace performance demand.
Whole Home Gas Furnace
Variable-speed induced blower
The furnace's blower provides precise control and disperses the
warmed air into the ductwork, distributing it throughout the home.
Whole Home Gas Furnace
Self-diagnostic control board
Continuously monitors the system for consistent, reliable
operation.
Whole Home Gas Furnace
Flue
A flue or chimney acts as an exhaust for gaseous by-products of
combustion used to create heat.
Daikin One +
Daikin One Touch
Daikin One Lite
Whole Home Gas Furnace
Thermostat
Thermostat
The thermostat acts as the control center of your HVAC
system, sensing indoor temperature and
sending signals to adjust the amount of heating or cooling required. Adjusting set points helps
ensure comfortable conditions in your living spaces, but this is just one basic feature. Daikin
smart thermostats are so much more and can be cloud-connected to not only ensure access from
anywhere in the world, but also collect performance data and alert your contractor (voluntarily) for
added peace of mind.
The Daikin One+ smart thermostat acts as a central hub for
controlling temperature, schedules, access,
and connectivity, as well as monitoring Indoor Air Quality conditions. It provides all the benefits of a
two-way communicating smart thermostat unique to Daikin. Advanced diagnostics, remote access, and a
user-friendly dial or touchscreen interface provide precise, efficient comfort management.
The Daikin One touch thermostat simplifies climate control
with a vibrant touchscreen and intuitive
menus. It provides all the benefits of a two-way communicating smart thermostat unique to Daikin to
measure and display indoor air quality indexes. It offers scheduling and energy usage insights, as well
as helping homeowners achieve steady comfort, convenience, and long-term energy savings.
The Daikin One Lite smart thermostat delivers essential
climate management. With simple controls, and
basic scheduling functions, it helps homeowners maintain comfortable conditions efficiently and
affordably.
Daikin two-way communication refers to the ability of a
Daikin One smart thermostats to send and receive
information from components of the system, allowing for full control and monitoring of the units through
a bi-directional communication protocol, enabling features like remote adjustments and real-time status
updates.
Thermostat
Hot Start Technology
When the heating operation starts or the unit changes from
cooling to heating, hot start technology is
designed to prevent a cold draft from being released into the room.
Thermostat
Energy Monitoring
Track Usage
Monitor energy usage and adjust settings for greater energy
savings.
Modern Unit
Traditional Unit
Whole Home Gas Furnace
Outdoor Unit
Outdoor Unit
The outdoor unit transfers the heat from your
home’s indoor air to the outside environment. Its
components include a compressor, which pressurizes and helps distribute refrigerants, such as R-32,
to the inside unit.
The compressor, contained in the outdoor unit, circulates the
refrigerant throughout the system. Not all
compressors are created equal. Traditional systems use single-speed (100% ON or OFF) or two-speed
compressors. Modern Daikin systems are equipped with adaptive inverter technology, which
adjusts the
compressor speed in real time, as necessary to balance indoor comfort and system efficiency.
Whole Home Gas Furnace
R-32 Refrigerant
The low global warming potential refrigerant (fluid) in the
copper refrigeration tubing that circulates
through the indoor and outdoor unit. R-32 has been used across the world for more than a decade and will
now be in all Daikin home air conditioners in North America.
Whole Home Gas Furnace
Modern Unit
Modern outdoor air conditioners, also known as condenser
units, use inverter-driven technology to
adjust the compressor's speed to match the thermostat’s cooling demand in real time. The inverter
technology redefines system performance, enhances energy efficiency, and provides sustainable energy
savings.
Traditional outdoor air conditioners, also known as condenser
units, utilize a single-speed or two-speed
compressor to meet your thermostat's cooling demand. A single-speed compressor operates at 100% capacity
until it reaches your preset indoor temperature and turns off. A two-stage compressor allows for two
levels of operation, which may help minimize uncomfortable temperature swings associated with
single-speed outdoor units.
The piping system allows for the transport of the
refrigerant between key outdoor and indoor
components like the compressor and the evaporator coils to facilitate heat exchange and the
refrigeration cycle.
Modern Unit
Traditional Unit
Whole Home Gas Furnace
Outdoor Unit
Outdoor Unit
The outdoor unit transfers the heat from your
home’s indoor air to the outside environment. Its
components include a compressor, which pressurizes and helps distribute refrigerants, such as R-32,
to the inside unit.
Often matched with split air conditioning systems, Daikin
furnaces not only do a great job of keeping
your home warm during the winter, but the furnace fan, or blower, is also used to assist the air
conditioning system in circulating cooled air during warmer seasons. A two-stage or variable-speed
blower for your Daikin furnace means it doesn't run at an all-or-nothing rate, providing high-efficiency
benefits.
The Daikin One Premium Air Cleaner is an optional, efficient
and convenient solution to help remove dust
and other airborne particulates passing through the return air ducts of your central heating and cooling
system. Its deep-pleated media filter contains more surface area than standard furnace filters, helping
capture more particles with little airflow restriction and allowing them to last longer between filter
changes.
The thermostat acts as the control center of your HVAC
system, sensing indoor temperature and
sending signals to adjust the amount of heating or cooling required. Adjusting set points helps
ensure comfortable conditions in your living spaces, but this is just one basic feature. Daikin
smart thermostats are so much more and can be cloud-connected to not only ensure access from
anywhere in the world, but also collect performance data and alert your contractor (voluntarily) for
added peace of mind.
The blower motor in the indoor air handler or gas furnace
circulates air through the ductwork and into
each room. It distributes cool air from an air conditioner or warm air from a furnace or heat pump.
Whole Home Gas Furnace
Evaporator Coil
When used with an air conditioner, warm air from your home
passes over the cold evaporator coil, losing
heat and cooling down. This process also helps reduce relative humidity, as moisture in the air
condenses on the coil, making the indoor environment more comfortable.
Modern Unit
Traditional Unit
Whole Home Gas Furnace
Outdoor Unit
Outdoor Unit
The outdoor unit transfers the heat from your
home’s indoor air to the outside environment. Its
components include a compressor, which pressurizes and helps distribute refrigerants, such as R-32,
to the inside unit.
The compressor, contained in the outdoor unit, circulates the
refrigerant throughout the system. Not all
compressors are created equal. Traditional systems use single-speed (100% ON or OFF) or two-speed
compressors. Modern Daikin systems are equipped with adaptive inverter technology, which
adjusts the
compressor speed in real time, as necessary to balance indoor comfort and system efficiency.
Whole Home Gas Furnace
R-32 Refrigerant
The low global warming potential refrigerant (fluid) in the
copper refrigeration tubing that circulates
through the indoor and outdoor unit. R-32 has been used across the world for more than a decade and will
now be in all Daikin home air conditioners in North America.
Whole Home Gas Furnace
Electronic Expansion Valve (EEV)
Electronic expansion valves are utilized in Daikin modern
heat pumps to precisely control refrigerant
flow into the system. The EEV operates in tandem with the inverter compressor speed to deliver precise
refrigerant flow, improving the system’s response, energy saving, and precise control. EEV is a
technological upgrade over standard thermostatic expansion valves (TXV) used in traditional,
non-inverter systems.
Whole Home Gas Furnace
Intelligent Defrost Mode
The outdoor unit will enable this mode to help prevent
frost/ice from building up in cold climate
conditions. It also helps with longer heating operation time for additional comfort for occupants
(compared to HVAC systems without this function).
Whole Home Gas Furnace
Modern Unit
Modern outdoor air conditioners, also known as condenser
units, use inverter-driven technology to
adjust the compressor's speed to match the thermostat’s cooling demand in real time. The inverter
technology redefines system performance, enhances energy efficiency, and provides sustainable energy
savings.
Traditional outdoor air conditioners, also known as condenser
units, utilize a single-speed or two-speed
compressor to meet your thermostat's cooling demand. A single-speed compressor operates at 100% capacity
until it reaches your preset indoor temperature and turns off. A two-stage compressor allows for two
levels of operation, which may help minimize uncomfortable temperature swings associated with
single-speed outdoor units.
To complement the cooling features of an air conditioning
system, the indoor unit provides the heating function and helps circulate conditioned air throughout
your home
The Daikin One+ smart thermostat acts as a central hub for
controlling temperature, schedules, access,
and connectivity, as well as monitoring Indoor Air Quality conditions. It provides all the benefits of a
two-way communicating smart thermostat unique to Daikin. Advanced diagnostics, remote access, and a
user-friendly dial or touchscreen interface provide precise, efficient comfort management.
The Daikin One touch thermostat simplifies climate control
with a vibrant touchscreen and intuitive
menus. It provides all the benefits of a two-way communicating smart thermostat unique to Daikin to
measure and display indoor air quality indexes. It offers scheduling and energy usage insights, as well
as helping homeowners achieve steady comfort, convenience, and long-term energy savings.
The Daikin One Lite smart thermostat delivers essential
climate management. With simple controls, and
basic scheduling functions, it helps homeowners maintain comfortable conditions efficiently and
affordably.
Daikin two-way communication refers to the ability of a
Daikin One smart thermostats to send and receive
information from components of the system, allowing for full control and monitoring of the units through
a bi-directional communication protocol, enabling features like remote adjustments and real-time status
updates.
The piping system allows for the transport of the
refrigerant between key outdoor and indoor
components like the compressor and the evaporator coils to facilitate heat exchange and the
refrigeration cycle.
Modern Unit
Traditional Unit
Whole Home Gas Furnace
Outdoor Unit
Outdoor Unit
The outdoor unit transfers the heat from your
home’s indoor air to the outside environment. Its
components include a compressor, which pressurizes and helps distribute refrigerants, such as R-32,
to the inside unit.
Often matched with split air conditioning systems, Daikin
furnaces not only do a great job of keeping
your home warm during the winter, but the furnace fan, or blower, is also used to assist the air
conditioning system in circulating cooled air during warmer seasons. A two-stage or variable-speed
blower for your Daikin furnace means it doesn't run at an all-or-nothing rate, providing high-efficiency
benefits.
The Daikin One Premium Air Cleaner is an optional, efficient
and convenient solution to help remove dust
and other airborne particulates passing through the return air ducts of your central heating and cooling
system. Its deep-pleated media filter contains more surface area than standard furnace filters, helping
capture more particles with little airflow restriction and allowing them to last longer between filter
changes.
The thermostat acts as the control center of your HVAC
system, sensing indoor temperature and
sending signals to adjust the amount of heating or cooling required. Adjusting set points helps
ensure comfortable conditions in your living spaces, but this is just one basic feature. Daikin
smart thermostats are so much more and can be cloud-connected to not only ensure access from
anywhere in the world, but also collect performance data and alert your contractor (voluntarily) for
added peace of mind.
The blower motor in the indoor air handler or gas furnace
circulates air through the ductwork and into
each room. It distributes cool air from an air conditioner or warm air from a furnace or heat pump.
Whole Home Gas Furnace
Evaporator Coil
When used with an air conditioner, warm air from your home
passes over the cold evaporator coil, losing
heat and cooling down. This process also helps reduce relative humidity, as moisture in the air
condenses on the coil, making the indoor environment more comfortable.
Modern Unit
Traditional Unit
Whole Home Gas Furnace
Outdoor Unit
Outdoor Unit
The outdoor unit transfers the heat from your
home’s indoor air to the outside environment. Its
components include a compressor, which pressurizes and helps distribute refrigerants, such as R-32,
to the inside unit.
The compressor, contained in the outdoor unit, circulates the
refrigerant throughout the system. Not all
compressors are created equal. Traditional systems use single-speed (100% ON or OFF) or two-speed
compressors. Modern Daikin systems are equipped with adaptive inverter technology, which
adjusts the
compressor speed in real time, as necessary to balance indoor comfort and system efficiency.
Whole Home Gas Furnace
R-32 Refrigerant
The low global warming potential refrigerant (fluid) in the
copper refrigeration tubing that circulates
through the indoor and outdoor unit. R-32 has been used across the world for more than a decade and will
now be in all Daikin home air conditioners in North America.
Whole Home Gas Furnace
Electronic Expansion Valve (EEV)
Electronic expansion valves are utilized in Daikin modern
heat pumps to precisely control refrigerant
flow into the system. The EEV operates in tandem with the inverter compressor speed to deliver precise
refrigerant flow, improving the system’s response, energy saving, and precise control. EEV is a
technological upgrade over standard thermostatic expansion valves (TXV) used in traditional,
non-inverter systems.
Whole Home Gas Furnace
Intelligent Defrost Mode
The outdoor unit will enable this mode to help prevent
frost/ice from building up in cold climate
conditions. It also helps with longer heating operation time for additional comfort for occupants
(compared to HVAC systems without this function).
Whole Home Gas Furnace
Modern Unit
Modern outdoor air conditioners, also known as condenser
units, use inverter-driven technology to
adjust the compressor's speed to match the thermostat’s cooling demand in real time. The inverter
technology redefines system performance, enhances energy efficiency, and provides sustainable energy
savings.
Traditional outdoor air conditioners, also known as condenser
units, utilize a single-speed or two-speed
compressor to meet your thermostat's cooling demand. A single-speed compressor operates at 100% capacity
until it reaches your preset indoor temperature and turns off. A two-stage compressor allows for two
levels of operation, which may help minimize uncomfortable temperature swings associated with
single-speed outdoor units.
To complement the cooling features of an air conditioning
system, the indoor unit provides the heating function and helps circulate conditioned air throughout
your home.
The Daikin One+ smart thermostat acts as a central hub for
controlling temperature, schedules, access,
and connectivity, as well as monitoring Indoor Air Quality conditions. It provides all the benefits of a
two-way communicating smart thermostat unique to Daikin. Advanced diagnostics, remote access, and a
user-friendly dial or touchscreen interface provide precise, efficient comfort management.
The Daikin One touch thermostat simplifies climate control
with a vibrant touchscreen and intuitive
menus. It provides all the benefits of a two-way communicating smart thermostat unique to Daikin to
measure and display indoor air quality indexes. It offers scheduling and energy usage insights, as well
as helping homeowners achieve steady comfort, convenience, and long-term energy savings.
The Daikin One Lite smart thermostat delivers essential
climate management. With simple controls, and
basic scheduling functions, it helps homeowners maintain comfortable conditions efficiently and
affordably.
Daikin two-way communication refers to the ability of a
Daikin One smart thermostats to send and receive
information from components of the system, allowing for full control and monitoring of the units through
a bi-directional communication protocol, enabling features like remote adjustments and real-time status
updates.
The piping system allows for the transport of the
refrigerant between key outdoor and indoor
components like the compressor and the evaporator coils to facilitate heat exchange and the
refrigeration cycle.
The DR80TC two-Stage gas valve, Variable-Speed blower motor Multi-Position gas Furnace provides exceptional indoor comfort and quiet operation. It is compatible with Daikin One+ smart thermostat and other Daikin communicating equipment and Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand.
Explore product manuals, warranty details, and other essential resources.
12-Year Parts, 12-Year Unit, 20-Year Heat Exchanger + One Time Heat Exchanger Replacement
*Complete warranty available from your local dealer or at www.daikincomfort.com. To receive the 12-Year Unit Replacement Limited Warranty (good for as long as you own your home), 99-Year Heat Exchanger Limited Warranty (good for as long as you own your home), and 12-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in California, Florida, or Quebec. The duration of warranty coverages in Texas and Florida differs in some cases. Additional requirements for annual maintenance are required for the 12-Year Unit Replacement Limited Warranty. Changes in law, regulations, or technology may result in an equivalent unit not being available. Other limitations and exclusions apply, refer to complete warranty details for full list of limitations and exclusions, as well as rights and obligations should an equivalent unit not be available.
Please enter your details to save and access your favorites
Daikin respects your privacy. Our Privacy Policy outlines how we collect and use information.
By submitting your information here, you agree that we may contact you about our current and future products
and services and that you are directing us to provide your submitted information to independent dealers in
your area that offer our products and services. Your agreement and consent are not required to make a purchase
but help facilitate future communications about, and the purchase of, Daikin, Goodman, and Amana-brand
products and services.
You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices,
and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.
By clicking submit below, you consent to allow Daikin to store and process the personal information submitted above to provide you the content requested.
The DR80TC two-Stage gas valve, Variable-Speed blower motor Multi-Position gas Furnace provides exceptional indoor comfort and quiet operation. It is compatible with Daikin One+ smart thermostat and other Daikin communicating equipment and Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand.
Explore product manuals, warranty details, and other essential resources.
12-Year Parts, 12-Year Unit, 20-Year Heat Exchanger + One Time Heat Exchanger Replacement
*Complete warranty available from your local dealer or at www.daikincomfort.com. To receive the 12-Year Unit Replacement Limited Warranty (good for as long as you own your home), 99-Year Heat Exchanger Limited Warranty (good for as long as you own your home), and 12-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in California, Florida, or Quebec. The duration of warranty coverages in Texas and Florida differs in some cases. Additional requirements for annual maintenance are required for the 12-Year Unit Replacement Limited Warranty. Changes in law, regulations, or technology may result in an equivalent unit not being available. Other limitations and exclusions apply, refer to complete warranty details for full list of limitations and exclusions, as well as rights and obligations should an equivalent unit not be available.
Please enter your details to save and access your favorites
Daikin respects your privacy. Our Privacy Policy outlines how we collect and use information.
By submitting your information here, you agree that we may contact you about our current and future products
and services and that you are directing us to provide your submitted information to independent dealers in
your area that offer our products and services. Your agreement and consent are not required to make a purchase
but help facilitate future communications about, and the purchase of, Daikin, Goodman, and Amana-brand
products and services.
You can unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices,
and how we are committed to protecting and respecting your privacy, please review our Privacy Policy.
By clicking submit below, you consent to allow Daikin to store and process the personal information submitted above to provide you the content requested.
